Heat pumps are getting more attention than ever in the UK, but if you’ve heard people say “they don’t work” or “they’re no good,” you’re not alone. The truth is, many early installations gave heat pumps a bad name — not because the technology doesn’t work, but because the fundamentals weren’t understood.
Boilers vs Heat Pumps: Why the Difference Matters
A gas boiler can be bolted onto almost any system. Even if it’s poorly designed, it will still give you heat. At worst, it will run at about 80–85% efficiency, and at best, a very good install might push it up to 95%. Either way, it will “work” — which is why many plumbers swear by them. The problem is, boilers burn fossil fuels, so every unit of heat comes with carbon emissions.
Heat pumps, on the other hand, don’t have that luxury of “just working.” They need careful thought, proper design, and a different way of thinking about heating.
The Fundamentals of Heat Pumps
Here’s what makes the difference between a poor heat pump installation and a great one:
- Room-by-room heat loss calculations → You can’t rely on rule-of-thumb sizing like you might with boilers. Each room needs to be calculated so the system matches the property exactly.
- System design and pipe sizing → A heat pump needs lower water temperatures to work efficiently. That means radiators might need to be upgraded, or pipework resized, so the system can deliver heat evenly.
- Weather compensation → Instead of an on/off internal thermostat like a boiler, heat pumps work best with an external sensor. The system then adjusts radiator temperatures to match the outside weather, keeping your home steady at 20–21°C without big swings or constant cycling.
- Right-sized heat pump → Oversizing is a common mistake. An oversized heat pump cycles on and off too often, wasting energy and shortening its life. The right size, matched to a proper design, keeps it smooth and efficient.
Why the Bad Reputation?
In the past, many heat pumps were thrown onto old systems without any of the fundamentals in place:
- No proper heat loss calculations
- Oversized units
- No weather compensation
- Old-style controls that caused constant cycling
The result? Efficiencies dropping below 200%, cold homes, and big bills. Naturally, people complained.
Getting It Right
When heat pumps are installed correctly, the results are very different. Many systems today achieve around 410% efficiency — meaning for every 1 unit of
electricity in, you get over 4 units of heat out. That’s only possible with the right design.
That’s why at VAYU we focus on the details:
- Detailed surveys
- Accurate room-by-room heat loss calculations
- Careful system design and pipe sizing
- Weather compensation as standard
Because with heat pumps, it’s not about “just making it work” — it’s about making it work brilliantly.
Takeaway
- Boilers can get away with sloppy installs; heat pumps can’t.
- Bad installs gave heat pumps a poor reputation in the past.
- The fundamentals — design, sizing, and controls — are what make or break them.
- When done right, heat pumps are incredibly efficient, reliable, and comfortable.